|
||||||||||||||
|
XDS H.110 cPCI High Density
|
||||||||
 |
||||||||
Product Part Number: 258L039 PC Form Factor: 6U CompactPCI TDM Bus Type: H.110 Bus Capacities: H.110 - 4096 timeslots Analog Ports - 32 The
H.110 cPCI station board provides thirty-two ports, each providing a
complete interface for a standard telephone device. The board is capable
of generating ringing internally, with a wide variety of ring cadences
supported for North American and European standards. The board supports
Caller ID with Calling Number and Calling Name Delivery as well as the
visual Message Waiting Indication feature. Internal DSPs provide DTMF
detection and generation, energy detection, and call progress tone generation.
Programmable hook flash and disconnect detection are supported. |
||||||||
|
Additional Product Specifications Analog Interface: Ports: 32 Connector: dual RJ21 on cPCI rear panel DSP Resources: DTMF Detector (each port) Energy Detector (each port) DTMF Generator (each port) North American and European Call Progress Tone Generation (each port) 1004Hz Calibration Tone Generation Caller Identity: Calling number delivery: supported Calling name delivery: supported Calling identity delivery on call waiting: supported Additional: Custom tone generation: supported Message waiting indicators: supported Programmable Hook-Flash detection: supported Call Waiting tone generation: supported cPCI Hot-Swap: supported Temperature Extremes: Operating: 0°C (+32°F) to +50°C (+122°F) Storage: -40°C (-40°F) to +70°C (+158°F) Ambient Humidity: Designed to withstand ambient relative humidity from 0% to 95% non-condensing in both operating and storage conditions. Mechanical: Designed to conform to PICMG® mechanical specifications for 6U CompactPCI cards. MTBF: 50,000 hours Electrical Requirements: +5 volts +5% @ 1.5 amps maximum +12 volts, +3 volts, and -5 volts are not required Primary Battery (-24 or -48 volts) maximum current per port 30mA Auxiliary Battery typically less than 15mA per port
|
||||||||
