XDS H.100 PCI 2/4-Wire E&M
Line Interface Board (8-port)

 

 
 
Product Part Number: 257L059

PC Form Factor: Full-length PCI
TDM Bus Type: H.100

Bus Capacities:
H.100 - 4096 timeslots
Analog Ports - 8

The E&M line interface board contains eight ports, each capable of 2-wire or 4-wire operation, using type I or type V signaling protocols. Signalling protocols and port types are programmed on a per-port basis. Individual ports may also be programmed for Radio Interface operation, allowing independent control of the E&M signalling leads on the application level. On-board DSP resources include DTMF detection and generation, as well as energy detection, North American / European call progress tones, and a 1004Hz calibration tone. Thirty-two independent bi-directional voice resource channels are also included.

Click here to download the XDS H.100 2/4-wire E&M technical manual

  
Additional Product Specifications

Analog Interface:
Ports: 8
Signalling: Type I / Type V (software configurable)
Port Types: 2-wire, 4-wire, Radio Interface
Connector: RJ21

DSP Resources:
DTMF Detector (each port)
Energy Detector (each port)
DTMF Generator (each port)
Call Progress Tone Generation (each port)
1004Hz Calibration Tone Generation

Transceiver Support :
Programmable echo suppression
PTT using M-lead to key transmitter upon energy detection
2100Hz tone detection to disable echo suppression on modem connections

 Temperature Extremes:
Operating: 0°C (+32°F) to +50°C (+122°F)
Storage: -40°C (-40°F) to +70°C (+158°F)

Ambient Humidity:
Designed to withstand ambient relative humidity from 0% to 95% non-condensing in both operating and storage conditions.

Mechanical:
Designed to conform to PCI-SIG mechanical specifications for full-length PCI cards.

MTBF:
50,000 hours

Electrical Requirements:
+5 volts +5% @ 1.5 amps maximum
+12 volts, +3 volts, and -5 volts are not required
-48 volts maximum current per port 30mA