XDS H.100 PCI High Density
Station / DID Board (24-port)

 

 
 
Product Part Number: 257L026

PC Form Factor: Full-length PCI
TDM Bus Type: H.100

Bus Capacities:
H.100 - 4096 timeslots
Analog Ports - 24

The H.100 PCI station board provides twenty-four ports, each providing a complete interface for a standard telephone device. The board is capable of generating ringing internally, with a wide variety of ring cadences supported for North American and European standards. The board supports Caller ID with Calling Number and Calling Name Delivery as well as the visual Message Waiting Indication feature. Internal DSPs provide DTMF detection and generation, energy detection, and call progress tone generation, as well as thirty-two independent bi-directional voice resource channels. Programmable hook flash and disconnect detection are supported.

Ports initialized as DID line interfaces implement RS-464 and IEEE standard protocols, including wink and immediate start, as well as DTMF and MF-R1 tone detection.


Click here to download the XDS H.100 High-Density Station Board / DID board technical manual

  
Additional Product Specifications

Analog Interface:
Ports: 24
Connector: RJ21

DSP Resources:
DTMF Detector (each port)
Energy Detector (each port)
DTMF Generator (each port)
North American and European Call Progress Tone Generation (each port)
1004Hz Calibration Tone Generation

Caller Identity:
Calling number delivery: supported
Calling name delivery: supported
Calling identity delivery on call waiting: supported

Additional:
Custom tone generation: supported
Message waiting indicators: supported
Programmable Hook-Flash detection: supported
Call Waiting tone generation: supported
MVIP/SCSA TDM legacy modes: supported
Temperature Extremes:
Operating: 0°C (+32°F) to +50°C (+122°F)
Storage: -40°C (-40°F) to +70°C (+158°F)

Ambient Humidity:
Designed to withstand ambient relative humidity from 0% to 95% non-condensing in both operating and storage conditions.

Mechanical:
Designed to conform to PCI-SIG mechanical specifications for full-length PCI cards.

MTBF:
50,000 hours

Electrical Requirements:
+5 volts +5% @ 1.5 amps maximum
+12 volts, +3 volts, and -5 volts are not required
-48 volts maximum current per port 100mA