 |
 |
||||
 |
 |
||||
|
|
XDS H.100 PCI MC-3 UltraLite Multi-Chassis Board XDS H.100 PCI MC-3 Lite Multi-Chassis Board XDS H.100 PCI Enhanced 128-Port Conference Board XDS H.100 PCI High Density Station Board XDS H.100 SC Bus/MVIP TDM Bus Adapter
When system needs become too great to be handled within a single PC chassis, Amtelco has a solution. The XDS H.100 PCI MC-3 Fiber Link Multi-Chassis Interconnect board provides fully dynamic switching with communications via dual-ported RAM. The multi-chassis bus includes a total of 2,423 redundant time slots (or 1,211 full duplex connections) over 2 fiber counter rotating rings. Configuring the bus in a non-redundant extended mode allows for system expansion of 4,800+ non-blocking time slots between either local or off-site locations. The board utilizes dual counter rotating OC3 fiber optic rings to connect between chassis up to 2,000 meters apart. The XDS H.100 PCI MC-3 board utilizes the proven XDS Infinity series processor, and can be a true H.100 Bus Master. SCSA, MVIP and H-MVIP bus signalling are supported. This board also features PCI Plug and Play, with 3.3 and 5-volt signalling supported on the PCI bus. Termination controls on the MC-3 board are software enhanced. The board also allows flexible sourcing and control of system clocks. A clock fallback feature is included for recovery in the event of an external clock failure. This board is also equipped for enhanced conferencing capability, with DTMF tone detection and DTMF tone clamping. Up to 128 ports may be combined in 42 simultaneous conferences, depending on specific user needs. Conference input levels and thresholds are controlled by software. The conferencing functions are independent of the multi-chassis interconnections. Driver support for Windows NT and Unix is available. This board features a H.100 compliant CT bus, a PCI compliant host processor bus and H.100 mechanical form factor. It also includes a music on hold port, and a high speed on-board processor. In addition, the H.100 MC-3 board provides for hyper channel support. All firmware is stored in on-board FLASH ROM which eliminates time consuming and error prone firmware downloading at boot time. The XDS H.100 PCI MC-3 board is fully compatible with other XDS products, including the XDS MC-3 ISA board, and other H.100 compliant products. AMTELCO fully supports compatible products from the multi vendor integration manufacturers. |
||||
|
H.100 PCI MC-3 Multi-Chassis Interconnect Board |
|||||
|
callcenter
solutions | contact
center solutions | ©2001 American-Tel-A-Systems, Inc. |
|||||
